MARKETS / COMPANIES / ECONOMYRSS edition ↗
Listing Review
Market News

White Cliff Minerals logs copper sulphides to 521m at Danvers

Deepest hole at Danvers logged visual copper sulphides to 521mDAN26050 assays include 63m at 0.39% copper from 21mTwo infill holes logged visual sulphides between Danvers 2 and 3Special Report: White Cliff Minerals’…

White Cliff Minerals logs copper sulphides to 521m at Danvers
  • Deepest hole at Danvers logged visual copper sulphides to 521m
  • DAN26050 assays include 63m at 0.39% copper from 21m
  • Two infill holes logged visual sulphides between Danvers 2 and 3

Special Report: White Cliff Minerals’ drilling has extended copper sulphide mineralisation at Danvers 1 to 521m downhole, or approximately 410m below surface, while two infill holes have recorded extensive sulphide intervals between Danvers 2 and 3.

Hole DAN26058, which is the deepest Danvers hole yet, logged 386m of cumulative visual copper sulphides, starting 13m downhole.

Intersecting multiple zones of chalcocite and bornite-bearing breccias extends copper sulphide mineralisation at Danvers 1 to depth, significantly enhancing upside

and supporting the potential down-plunge continuation of shallow, chalcocite-rich breccias.

The intersection of deep mineralisation achieves White Cliff Minerals’ (ASX:WCN) goal of testing Danvers 1’s depth potential while also collecting geological, structural and density data, plus samples for future metallurgical and comminution test work.

Adding further interest, shallower Danvers 1 drilling returned assays such as 63m grading 0.39% copper from a downhole depth of 21m in a new zone beside the main breccia.

Another hole, DAN26048, returned 25.14m at 0.69% copper from 203.36m, confirming mineralisation below historical drilling.

“Our drilling is addressing two important questions at Danvers: how far the mineralised system extends, and how its individual zones connect,” managing director Troy Whittaker said.

“At Danvers 1 the new shallow zone adds to the known mineralised footprint, while copper sulphides observed in DAN26058 extend the depth range being assessed.”

Drilling tests the Danvers gap

Drilling has also continued to highlight the potential continuity of mineralisation between the Danvers 2 and Danvers 3 areas that were initially explored and discovered with widely spaced reverse circulation holes in spring 2026.

Two diamond holes logged cumulative visual copper sulphide intervals of 86.89m and 155.33m within the 586m gap between the two areas.

Both holes were drilled along the Teshierpi Fault Zone, adding geological information between earlier, widely spaced intersections.

The new sulphide observations will feed into geological modelling, though assaying will be needed to establish the grades of those intervals.

WCN is processing results from airborne magnetic, gravity and radiometric surveys to inform 2027 drill targeting, while current drilling and pending assays will support work towards an exploration target and a maiden mineral resource estimate for Danvers.

Assays for DAN26058’s deeper sulphide intersections are expected in six to eight weeks.

This article was developed in collaboration with White Cliff Minerals, a Stockhead advertiser at the time of publishing.

This article does not constitute financial product advice. You should consider obtaining independent advice before making any financial decisions.

The post White Cliff Minerals logs copper sulphides to 521m at Danvers appeared first on Stockhead.

Source: Stockhead — Australian Stock Market ↗

Figures reflect the source report and its stated period. This article is for information and is not investment advice.